AzuritBer Pi Firmware (English): Unterschied zwischen den Versionen
Aus www.wiki.ardumower.de
(→What you need) |
|||
| Zeile 5: | Zeile 5: | ||
==What you need== | ==What you need== | ||
| − | 1 Raspberry PI 3B+ or PI4 (The Pizero W can work but very slowly and it's not the goal). | + | 1 Raspberry PI 3B+ or PI4 (The Pizero W can work but very slowly and it's not the goal).[[Datei:pi3_board.jpg|100px]] |
| − | + | ||
| − | [[Datei:pi3_board.jpg|100px]] | + | |
1 DC/DC voltage regulator to power the PI.Minumum 5A version from marotronics | 1 DC/DC voltage regulator to power the PI.Minumum 5A version from marotronics | ||
Version vom 4. November 2020, 19:25 Uhr
Level 2 Raspberry Pi
A Raspberry Pi is connected over Due Native USB to the arduino
What you need
1 Raspberry PI 3B+ or PI4 (The Pizero W can work but very slowly and it's not the goal).
1 DC/DC voltage regulator to power the PI.Minumum 5A version from marotronics
https://www.marotronics.de/5A-DC-DC-step-down-module-XL4015-with-heat-sink-eg-for-Arduino
1 USB mouse,keyboard for setting.You can simply use a standard one for the setting and disconnect it after But it's also possible to use a small one like that to drive the mower remotly in manual mode.
1 SD Card 32 GB class 10
1 PowerBank or power supply for the raspbeery pi minimum 3A
1 HDMI cable to see the PI desktop on your TV or HDMI Screen.
